Home | Chat | Gallery | SmileySchildGenerator | SmilieFaceMaker | Add to favorites| Board als Startseite?| Gratis Smileys
Gallery Chat Mitgliederliste Linkliste Statistik FAQ Registrieren Kalender Suchen
Willkommen, Gast! Mittwoch, 28. Oktober 2020, 18:35:07
Quicklogin:   Portal · Registrieren · Login · Passwort vergessen · Aktivierungslink erneut senden
Position: Home » Ausrüstung » High End Markierer » Planet Eclipse 2009er PSP Mode Settings
Antworten
Thema: "Planet Eclipse 2009er PSP Mode Settings" [ Seite 1 ]

Kein neuer Beitrag herzdrache , 12.02.2009, 21:07 Beitrag #1   
IP: n/a
Rang: Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren
Registrierung: 05.08.2006, 18:39
Homepage: http://forum.riedls.net
Geburtstag: 21.07.1980
Team: Cold Fusion
 

Paint-Masta mit 2634 Punkte, 2091 Beiträge
 
Hier die Settings für die aktuellen und älteren Eclipse Marker für die PSP 2009


Zitat:

For the 2009 season, the PSP has changed its rules regarding marker firing modes. Use the following
settings to set up Eclipse Egos for compliance with these new rules -

*The latest versions will be available as upgrades, free of charge, from the Planet Eclipse Tech
Support Booth at all 2009 PSP events starting with the Phoenix Open. They will also be available to
registered users only from our RI Service Center after the Phoenix Open.

Ego 9 / SL94
To determine the firmware version, power up the marker by pushing and holding the middle button on
the console, after a short delay the version number will be displayed on the LCD.

Firmware Version 1.20*
Select PRESET / LOAD / PSP 12 (high divisions) or PSP 10 (low divisions) from the Setup Menu.

Firmware Version 1.00 – 1.13
Select PRESET/LOAD/PSP 08 from the Setup Menu
Set the MAX ROF parameter to 12.0bps (high divisions) or 10.0bps (low divisions)
Set the OFF ROF parameter to 10bps


Geo / SL91
To determine the firmware version, power up the marker by pushing and holding the middle button on
the console, after a short delay the version number will be displayed on the LCD.

Firmware Version 1.20*
Select PRESET / LOAD / PSP 12 (high divisions) or PSP 10 (low divisions) from the Setup Menu.

Firmware Version 1.00 – 1.10
Select PRESET/LOAD/PSP 08 from the Setup Menu
Set the MAX ROF parameter to 12.0bps (high divisions) or 10.0bps (low divisions)
Set the OFF ROF parameter to 10bps


Ego 8 / SL8r
Firmware Version 4.20*
Select PRESET / LOAD / PSP 12 (high divisions) or PSP 10 (low divisions) from the Setup Menu.

Firmware Version 4.00 – 4.14
Select PRESET/LOAD/PSP 08 from the Setup Menu
Set the MAX ROF parameter to 12.0bps (high divisions) or 10.0bps (low divisions)
Set the OFF ROF parameter to 10bps


Ego 7 / SL74
Firmware Version 3.20
Select PRESET/LOAD/PSP 07 from the Setup Menu
Set the MAX ROF parameter to 12.0bps (high divisions) or 10.0bps (low divisions)
Set the OFF ROF parameter to 10bps

Firmware Version 3.00 – 3.14
Select PRESET/LOAD/PSP from the Setup Menu
Set the MAX ROF parameter to 12.0bps (high divisions) or 10.0bps (low divisions)
Set the OFF ROF parameter to 10bps


Ego 6 / SL66
Firmware Version 2.00 – 2.20
Select MODE/RAMP1 from the Setup Menu
Set the TIMING/ROF CAP parameter to 12.0bps (high divisions) or 10.0bps (low divisions)
Set the TIMING/OFF ROF parameter to 10bps


Ego 5
Firmware Version 1.06 – 1.10
Select MODE/RAMP1 from the Setup Menu
Set the TIMING/ROF CAP parameter to 12.0bps (high divisions) or 10.0bps (low divisions)
Set the TIMING/OFF ROF parameter to 10bps

Firmware Version 0.17 – 1.05
Firmware update needed.


Etek 2 STAR Frame
To determine the firmware version, power up the marker by pushing and holding the middle button on
the console, after a short delay the version number will be displayed on the LCD.

Firmware Version 1.20*
Select PRESET/LOAD/PSP 12 (high divisions) or PSP 10 (low divisions) from the Setup Menu.

Firmware Version 1.10
Select PRESET/LOAD/PSP 07 from the Setup Menu
Set the MAX ROF parameter to 12.0bps (high divisions) or 10.0bps (low divisions)
Set the OFF ROF parameter to 10bps

Firmware Version 1.00 – 1.01
Select PRESET/LOAD/PSP from the Setup Menu
Set the MAX ROF parameter to 12.0bps (high divisions) or 10.0bps (low divisions)
Set the OFF ROF parameter to 10bps


Etek 2
Firmware Version 1.40*
Set the Firing Mode parameter (red led) to 9 - Ramp 7 (high divisions) or 8 - Ramp 6 (low divisions).

Firmware Version 1.00 – 1.30
Set the Firing Mode parameter (red led) to 3 (Ramp 1).
Set the Maximum ROF (Capped) parameter (green led) to 12.0 (high divisions) or 10.0 (low divisions)
Set the Maximum ROF (BBSS Disabled) parameter (blue led) to 10.0


Etek 1
Set the Firing Mode parameter (red led) to 3 (Ramp 1).
Set the Maximum ROF (Capped) parameter (green led) to 12.0 (high divisions) or 10.0 (low divisions)
Set the Maximum ROF (BBSS Disabled) parameter (blue led) to 10.0


lg P.


if ( $ahnung == 'keine' ) { lies ( FAQ ) && ( Suchen ) } else { post->frage }



OfflineEmailPriv. Msg. Thema löschenEditierenZitat
Abonnieren Druckansicht Antworten

1    ( Anzeige: 1 - 1 , Gesamt: 1 )

User in diesem Thema: 0 Registrierte, 0 Versteckte, 1 Gast, 0 Bots
Keine

Thema-Aktionen: Beiträge verschieben


Ähnliche Themen zu "Planet Eclipse 2009er PSP Mode Settings"
  Antworten Aufrufe Themeneröffnung Letzter Beitrag

Thema neue Garantiebestimmungen bei Planet Ecl ... 0 2366 17.12.2008, 14:28
Von: herzdrache
17.12.2008, 14:28
Von: herzdrache

Thema Die Neuen PlanetEclipse Makierer 2008 11 5526 03.10.2008, 13:17
Von: Rapfmaster
07.10.2008, 07:59
Von: herzdrache

Thema RPS & Eclipse ist und bleibt State of th ... 0 2834 03.04.2008, 18:28
Von: herzdrache
03.04.2008, 18:28
Von: herzdrache

  Ego Einstellungen Mille und PSP 1 3289 26.01.2008, 11:43
Von: Rapfmaster
26.01.2008, 14:28
Von: herzdrache

  Eclipse 08 Products noch im Dezember 200 ... 4 3302 20.11.2007, 06:02
Von: herzdrache
21.11.2007, 01:17
Von: devilfighter
 
0.053273 Sek. 8 DB-Zugriffe
Boardsolution v1.35 | © Nils Asmussen 2003-2007