Home | Chat | Gallery | SmileySchildGenerator | SmilieFaceMaker | Add to favorites| Board als Startseite?| Gratis Smileys
Gallery Chat Mitgliederliste Linkliste Statistik FAQ Registrieren Kalender Suchen
Willkommen, Gast! Freitag, 29. März 2024, 11:19:04
Quicklogin:   Portal · Registrieren · Login · Passwort vergessen · Aktivierungslink erneut senden
Position: Home » Ausrüstung » High End Markierer » Ego Einstellungen Mille und PSP
Antworten
Thema: "Ego Einstellungen Mille und PSP" [ Seite 1 ]

Kein neuer Beitrag Rapfmaster , 26.01.2008, 11:43 Beitrag #1   
IP: n/a
Rang: Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren
Registrierung: 22.10.2006, 16:29
Homepage: http://www.websingles.at/11...
Geburtstag: 03.08.1976
Team: Cold-Fusion
 

Bundesligaspieler mit 811 Punkte, 702 Beiträge
 
Nach dem ich ja wie jeder Brave Ego Spieler meinen Schatz bei Planet Registriert habe, habe ich
dieses schöne Mail wegen Mille und PSP bekommen. Also viel Spass beim Einstellen!


info@planeteclipse.com hat folgendes geschrieben:


PSP
In order to comply with the new 2008 PSP rule regarding gun firing modes, we recommend that Eclipse
markers should be configured as follows -

Ego 7 / Ego 8

1. Enter the Setup menu
2. Select (PRESET) (LOAD) and choose the PSP option
3. Select (MAX ROF) and set the value to 13.0*
4. Select (OFF ROF) and set the value to 13.0* or less (recommend 12.0)
5. Select (PRESET) (SAVE) and choose the USER 1 option to save these settings for future use.
6. Exit the Setup menu
7. Check the rate of fire on a league approved ROF meter.

Ego 5 / Ego 6

1. Enter the Setup menu
2. Select (MODE) and choose the RAMP 1 or PSP option
3. Select (ROF CAP) and set the value to 13.0*
4. Select (OFF ROF) and set the value to 13.0* or less (recommend 12.0)
5. Exit the Setup menu 6. Check the rate of fire on a league approved ROF meter.

Etek / Etek 2

1. Enter the Setup menu
2. Select Firing Mode (red) and set the value to 03.0 (Ramp 1)
3. Select Maximum ROF (green) and set the value to 13.0*
4. Select Maximum ROF with BBSS Disabled (blue) and set the value to 13.0 or less (recommend 12.0)
5. Exit the Setup menu 6. Check the rate of fire on a league approved ROF meter.

Planet Eclipse no longer provides software updates for the eBlade platform, however the following
may prove useful in setting these products up to be compliant

E2 / Zero B

1. Fit fresh batteries to the loader that will be used and set the loader speed as required
2. Enter the Setup menu
3. Select (MODE) and choose the RAMP 1 or PSP option
4. Set the COFF parameter to 40ms
5. Enable the breech sensor
6. Shoot the gun so that it ramps and measure the ROF on a rate of fire meter
7. Adjust the COFF parameter and repeat 6 until the ROF is 13.0bps* (increasing COFF reduces ROF)
8. Check that CDELAY + CON + COFF is greater than 77ms and if not then increase CON
9. Exit the Setup menu
10. Check the rate of fire on a league approved ROF meter.

E1 (eBlade)
1. Fit fresh batteries to the loader that will be used and set the loader speed as required
2. Enter the Setup menu
3. Set the COFF parameter to 40ms
4. Enable the breech sensor
5. Shoot the gun as quickly as you can and measure the ROF on a rate of fire meter
6. Adjust the COFF parameter and repeat 5 until the ROF is 13.0bps* (increasing COFF reduces ROF)
7. Check that CDELAY + CON + COFF is greater than 77ms and if not then increase CON
8. Exit the Setup menu
9. Check the rate of fire on a league approved ROF meter.

*The rate of fire settings on Egos are accurate however not all rate of fire meters will read the
same. We recommend that guns be set on the safe side of the legal limit. The difference between
13.0 and 13.33bps is only 1 extra ball every 39 shots!

Millinnium
In order to comply with the new Millennium rule regarding gun firing modes, Eclipse markers should
be configured as follows -

Ego 7 / Ego 8

1. Enter the Setup menu
2. Select (PRESET) (LOAD) and choose the MILLEN option
3. Select (MAX ROF) and set the value to 11.8*
4. Select (OFF ROF) and set the value to 11.8*
5. Select (RAMP SET) (KICK IN) and set the value to 6.0
6. Select (RAMP SET) (SUSTAIN) and set the value to 6.0
7. Select (PRESET) (SAVE) and choose the USER 1 option to save these settings for future use.
8. Exit the Setup menu
9. Check the rate of fire on a league approved ROF meter.

Ego 5 / Ego 6

1. Enter the Setup menu
2. Select (MODE) and choose the RAMP 3** option
3. Select (ROF CAP) and set the value to 11.8*
4. Select (OFF ROF) and set the value to 11.8*
5. Exit the Setup menu
6. Check the rate of fire on a league approved ROF meter.

Etek / Etek 2

1. Enter the Setup menu
2. Select Firing Mode (red) and set the value to 05.0 (Ramp 3)
3. Select Maximum ROF (green) and set the value to 11.8*
4. Select Maximum ROF with BBSS Disabled (blue) and set the value to 11.8*
5. Exit the Setup menu 6. Check the rate of fire on a league approved ROF meter.

Planet Eclipse no longer provides software updates for the eBlade platform, however the following
may prove useful in setting these products up to be compliant

E2 / Zero B

1. Fit fresh batteries to the loader that will be used and set the loader speed as required
2. Enter the Setup menu
3. Select (MODE) and choose the RAMP 3** option
4. Set the COFF parameter to 40ms
5. Enable the breech sensor
6. Shoot the gun so that it ramps and measure the ROF on a rate of fire meter
7. Adjust the COFF parameter and repeat 6 until the ROF is 11.8bps* (increasing COFF reduces ROF)
8. Check that CDELAY + CON + COFF is greater than 84ms and if not then increase CON 9. Exit the
Setup menu 10. Check the rate of fire on a league approved ROF meter.

E1 (eBlade)
1. Fit fresh batteries to the loader that will be used and set the loader speed as required
2. Enter the Setup menu
3. Set the COFF parameter to 40ms
4. Enable the breech sensor
5. Shoot the gun as quickly as you can and measure the ROF on a rate of fire meter
6. Adjust the COFF parameter and repeat 5 until the ROF is 11.8bps* (increasing COFF reduces ROF)
7. Check that CDELAY + CON + COFF is greater than 84ms and if not then increase CON
8. Exit the Setup menu
9. Check the rate of fire on a league approved ROF meter.

*The rate of fire settings on Egos are accurate however not all rate of fire meters will read the
same. We recommend that guns be set on the safe side of the legal limit. The difference between
11.8 and 12.0bps is only 1 extra ball every 59 shots!

**If your software does not have the RAMP 3 option then it will be necessary to upgrade your
software to the latest version.




"Über 5000 Paintballer können nicht richtig triggern und nachpotten..
Schreib dich nicht ab, lern triggern und nachpotten"


OfflineEmailPriv. Msg. Thema löschenEditierenZitat
 
Kein neuer Beitrag herzdrache , 26.01.2008, 14:28 Beitrag #2   
IP: n/a
Rang: Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren Administratoren
Registrierung: 05.08.2006, 18:39
Homepage: http://forum.riedls.net
Geburtstag: 21.07.1980
Team: Cold Fusion
 

Paint-Masta mit 2634 Punkte, 2091 Beiträge
 
:respect:


if ( $ahnung == 'keine' ) { lies ( FAQ ) && ( Suchen ) } else { post->frage }



OfflineEmailPriv. Msg. LöschenEditierenZitat
Abonnieren Druckansicht Antworten

1    ( Anzeige: 1 - 2 , Gesamt: 2 )

User in diesem Thema: 0 Registrierte, 0 Versteckte, 1 Gast, 0 Bots
Keine

Thema-Aktionen: Beiträge verschieben


Ähnliche Themen zu "Ego Einstellungen Mille und PSP"
  Antworten Aufrufe Themeneröffnung Letzter Beitrag

  Ego SL94 und Geo SL91 Teaser's.... 3 26858 04.02.2009, 15:00
Von: herzdrache
17.03.2009, 19:52
Von: Alex

  Planet Eclipse 2009er PSP Mode Settings 0 19079 12.02.2009, 21:07
Von: herzdrache
12.02.2009, 21:07
Von: herzdrache

  EGO8 Superpreis 0 12975 16.10.2008, 18:07
Von: herzdrache
16.10.2008, 18:07
Von: herzdrache

  Neue bilder der ego 09 0 13385 28.05.2008, 19:17
Von: breaki
28.05.2008, 19:17
Von: breaki

  Milleniumrules 3 11658 21.01.2008, 22:52
Von: herzdrache
05.03.2008, 14:06
Von: herzdrache
 
0.108986 Sek. 7 DB-Zugriffe
Boardsolution v1.35 | © Nils Asmussen 2003-2007