Paintballforum d. 1. PbSV Deutsch-Wagram

Position: Allgemeines » News » Markiererfolien - das neue schnelle Teamguntuning??!? » Druckansicht

Beiträge zu diesem Thema:

herzdrache, 24.01.2008, 10:44
Hi Leutz!

Hab soeben was interessantes im Hub gefunden!
Hier mal die ersten Fotos und Statements!


Zitat:

So, lets say you want to rep your favorite team, or your team, or a sexy picture of your girlfriend
who is over the age of 18 and has given consent for the use of her image....

You could spend a small fortune on anodizing, and lets face it, the number of shops that can do
really really amazing work is rather limited... or... you could get a $50,000 solvent printer and
do it in vinyl instead.









This is just a quick sample I tossed together at work today in some free time. Its not laminated
because its a royal pain to set up the printer and the laminator to print, laminate, find the
registration marks, and cut, so there are a few tiny wrinkles that wouldn't be there normally.

I borrowed the graphics from a desktop background done by Miguel Cruz, so for those who aren't a
fan of the design, you should know that you can put ANYTHING on there, as long as you design it.

I'm trying to convince my boss to let me start doing marker wraps when I'm not doing vehicle wraps,
so I thought this would be a good place to gauge interest in that sort of thing.

It can be done on basically any marker, but ones with super complex milling will be harder to
apply. something like a DM or shocker would turn out quite well because of the lack of a window
between the tubes.

The vinyl + laminate will also serve to protect your marker from everyday wear and tear. It won't
stop a bullet, but you won't have to worry about ruining your resale value every time you slide.



folgende Infos dazu:

heimwerkerking hat folgendes geschrieben:

die folie heisst wrapfolie und wird zb benutzt um fahrzeuge komplett mit einem druck einzuwrappen.
das ganze wird mit solventtinte, also lösemittelfarbe bedruckt (spezielle drucker).
die folie is hochelastisch und kann mehrmals mit seifenwasser appliziert werden bevor mann dann das
überschüssige wasser unter der folie wegrakelt und die folie engültig haftet.

kann dir jeder bessere fahrzeugbeschrifter machen. das applizieren braucht allerdings etwas übung


@rapfi
wäre das net was für Sound & Sign??

lg P.
Rapfmaster, 24.01.2008, 13:34

herzdrache hat folgendes geschrieben:

@rapfi
wäre das net was für Sound & Sign??


Leider hat er dazu nicht das Richtige Equipment, und das so zu Kleben dafür muss man sehr gut sein.
Jeder der schon mal ein Pickerl was grösser ist als 30cm auf einer gebogenen fläche Blassen frei zu
kleben versucht hat weis wovon ich rede.